Sunricher SR-2303SAC-HP DALI-2 DT6 to AC Phase-Cut (TRIAC) Dimming Controller

ADM has expanded our capabilities in DALI lighting control by introducing the Sunricher SR-2400PD NFC programmable 2-key push to DALI-2 converter. This device has two input options: a 2-channel push switch, or a dry contact motion sensor. The sensor takes these inputs and converts them into a DALI-2 signal to control lighting gear. There are two modes of dimming operation: Push Dim – for manual dimming via a standard momentary push (non-latching) push switch. Corridor DIM – for automated control via motion sensors. Both modes are NFC programmable for flexible configuration. There are also two

ADM continues to expand our capabilities in DALI lighting control by introducing the Sunricher SR-DA2833PN-DA2 NFC programmable 4-key push button coupler. This device accepts 4 push switch inputs or dry contact motion sensor inputs, connecting them to a DALI network. It acts as a bridge between the physical switches and the DALI system. The SR-DA2833PN-DA2 supports both standalone and DALI-2 instance modes. It is easily configured using the NFC programming functions. This device is ideal for wall mounted control panels, allowing users to trigger scenes, dim lights, or switch devices within a

The Sunricher SR-2303AC-4CH-DIN is a DIN rail mountable 4 channel DALI-2 to AC dimming (TRIAC) converter. It takes the output from a DALI-2 controller and “chops” the AC output to control AC dimmable or TRIAC dimmable lighting gear. There are four 100~240VAC output channels, each rated at 1.8A. Each channel can be controlled separately or synchronously. The SR-2303AC-4CH-DIN takes a 100~240VAC input. This device is ideal for single-colour LED, incandescent, and halogen lights, and is easy to set up using the buttons and display on the front of the device. You can set a minimum brightness level